Machine Tools Syndicate
About us
Home
Contact
Our Client
Products
Sitemap
Infratructure
Instrument Valves
2 Valve Manifolds >>
Tee Type
Tee Type
Straight Type
NO DESCRIPTION QTY MATERIAL
1 BODY 1 PE-SS 316
2 BONNET 1 PE-SS 316
3 STEM 1 PE-SS 316
4 BONNET PUSHER 1 PE-SS316
5 LOCK NUT 1 PE-SS 316
6 PACKING 1
7 WASHER 1 PE-SS 316
8 HANDLE 1 PE-SS304
9 GRUB SCREW 1 PE-SS
10 DUST CAP 1 PLASTIC
11 LOCKING PIN 1 PE-SS 304
12 BONNET SEAL 1
Features
2 Valve Manifolds (Tee Type)


  

Bonnet Assembly
  • 2  valve  manifolds  are  designed  for   direct  mounting. Connecting  from process side1/2" NPT             (F) and Instrument  side Flange   connection on  suitable for DP  transmitter. Connecting   system    impulse lines and transmitters, having simple two valves configuration which allows for easy block          or Isolate, Bleed or Vent valve calibration of a static pressure transmitter or gauge.
  • Bleed/vent connection with s.s. plug will be provided on request.
  • Approximate weight : xxx Kg (xxx Lbs.).
  • Heat code traceability


  • Screwed bonnet design.
  • Bonnet-back seated blow out proof.
  • Spindle-Ground and thread rolled.
  • Spindle tip
  • Non rotating tip shut off type -stellited, Regulating-stellited and soft seated.
  • Bonnet pusher - silver plated for anti galling freezing for increased stem cycle life.
  • Dust cap protects stem threads from externals contamination.
  • Leak tight seal with low operating torque.
Technical Specfications
Size : 1/4", 1/2"
End connection : NPT,BSPT,Socket weld.
Working Pressure : 6000 Psi (413 Bar)
Temperature Rating : PTFE 450 Deg. F (232 Deg.C) Grafoil 700 Deg. F(371 Deg. C)
Material of construction : SS 316, SS 304, Monel,C.S.
Optional Sour Gas service valves are available confirming to NACE Std. MR -
01 - 75
Stem packing : PTFE, Grafoil.
Orifice : Dia. 4.0
All valves are 100% Factory tested prior to shipment.
Applications

Refineries,liquid patroleum gas processing plant,petro-chemical plants, systems difficult to shur off due    to solid contents dust, rust, dirt etc.

Manifolds Selection Information Data

Pressure &temperature ratings are selected from ANSI B 16.34 for standard class 2500

Testing

   Pneumatic Seat test is performed at 1/4 of working pressure.
    Hydrostatic shell test is performed at 1.5 times the working pressure.
    Optional test are available upon request.

Lubrications

Dye Molly Sulphide.
- Contact Us -
MACHINE TOOLS SYNDICATE
Shop No: - 2, Bhanu Housing Co-operative Society,
Khopat, Thane (West), Mumbai: - 400 602..
Tel. No: - +91 22 6526 8721, Fax No: - +91 22 2547 5349.
E-mail: - mts.globe@gmail.com
Website: - www.machinetoolssyndicate.biz
Copyright © Machine Tools Syndicate. All Rights Reserved.
All Trademarks and/or Trade names are the properties of their respective owners